NETA KİMYA
Menu
Building Maintenance Problems and Problem Solving
| Problem | Cause | Suggesitons |
|---|---|---|
| Insufficient Cleaning Performance | Insufficient cleaning frequency Inadequate or wrong product usage Inadequate ventilation Leaving drain lids open Insufficiently cleaned urinals and non functioning flushes | Increase cleaning frequency depending on traffic Make sure it’s ventilated adequately Cap the drains or make sure there is water in order to prevent air passage Ensure influx of water |
| Black and yellow spots on WC floor | * High ratio of mangan and iron | * Prevent water leakage |
| Limestone and other stains on fountain and armature | Water hardness Wrong product use | Clean and dry with organic descaler Do not use wrong type of product on wrong surfaces. (Do NOT use products for toilets on armatures) |
| Wear and tear on bathroom surfaces | * Wrong Product use | * Depredation caused by wrong product usage can only be corrected by replacing the depredated areas |
| Calcification on shower cabins | Calsifications on shover cabins Water stains on shower cabins | Use lightly acidic procuts, otherwise you may damage your shower cabins Use organic acid products |
| Joint gap tarnishin in bathrooms and WC | * Inadequate cleaning | * WC floor must be washed frequently with correct cleaning products, preferably using hot water. |
| Dusty and dirty looking chandelier crystals | * Inadequate cleaning, wrong product usage | * Fast drying, fast acting cleaning products must be applied frequently |
| Tarnishing of brass and copper materials | * Inadequate care and cleaning | * Use brass and copper polisher products frequently in order to prevent oxidization |